Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Loosen DME control unit and support.
1.1. Unscrew fastening screws -1 -.
1.2. Unclip wire harness -2- on the support -arrow A-.
1.3. Move DME control unit and support -3- to one side -arrow B- until the connectors are easily accessible.
2. Release the latch on both connectors -1 and 2- ( -arrows A- ) and pull the connectors -1 and 2- off the DME control unit -3- ( -arrows B- ).