Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Coolant guide
1
- Coolant pipe with sealing ring
2
- Coolant temperature sensor
9
- Coolant guide (collection pipe)
1. Pull off the cable plug for the temperature sensor -37- between the bulkhead and the engine wire harness duct. To do this, carefully pull the cable
duct forward and release and pull off the cable plug with a hook assembly tool T10118.
Wire harness assignment
37
- Coolant temperature sensor
A - Direction of travel
2. Unscrew the coolant temperature sensor using a suitable socket. Close off the threaded bore so that only a small amount of coolant leaks out.
Installing coolant temperature sensor
1. Fit and screw in the coolant temperature sensor. - Tightening torque: 30 Nm (22 ftlb.)