Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Oil guide housing with accessories
1
- Guide tube
2
- O-ring
3
- Screw, M6 x 16
4
- Oil dipstick
5
- O-ring
6
- Screw, M6 x 25; timing-case cover to oil guide housing
7
- Oil level sensor
8
- O-ring
9
- Joint flange
10
- Screw, M6 x 20
11
- Screw, M6 x 16
A - Direction of travel
4. Remove deflection roller between the vibration balancer and the generator. To do this, use a small screwdriver to pry off the lid and loosen the
screw. Remove deflection roller with screw. -1-
Belt drive
1
- Deflection roller
2
- Hydraulic belt tensioner; tensioner to lever
3
- Screw, M8 x 96; complete lever to timing-case cover and cylinder head
4
- Deflection roller
5
- Dual poly-V-belt
Removing oil pressure sensor
1. Pull off cable plug for oil pressure sensor.
2. Place a cloth around the components. Collect dripping oil.
3. Remove oil pressure sensor (oil pressure sender) with adapter -3 and 1-. To do this, remove the two screws -4- and pull the components straight
off. Replace sealing rings.
Oil pressure sensor and oil pressure measuring point