Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Combination Switch: Service and Repair
Removing And Installing Steering-Column Switch
Technical values
Preliminary work
Preliminary work for removing and installing steering column switch
1. Observe the airbag safety regulations.
2. Remove driver's airbag unit.
3. Remove steering wheel.
4. Remove steering column trim.
Removing steering column switch
CAUTION:
Risk of short circuit.
-
Before removing steering column switch, remove ignition key.
WARNING:
Risk of damage to airbag contact unit.
-
When removing and installing steering column switch, the steering wheel must be pulled off in the straight-ahead position. This ensures
that the airbag contact unit is locked in the central position.
-
If the setting has inadvertently changed (locking element released, airbag contact unit out of adjustment), the airbag contact unit must be
adjusted.