Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Threaded joint on ORS sensor
2. Loosen the plug connection for the sensor line.
3. Loosen the hose clamp and guide the cable through.
Information:
Wear protective gloves and goggles.
Clean the contact surface of the sensor with a lint-free cloth.
Use a new O-ring.
Observe correct tightening torques.
4. Use a suitable collecting container and remove the sensor cover.
O-ring on ORS sensor
5. Fit the O-ring. Ensure that the O-ring is seated correctly -arrow-.
6. Insert the sensor into the sensor cover. Fit the assembly (sensor cover/sensor) -arrows-.
Threaded joint on ORS sensor
7. Fit plug connection for sensor line, clip in cable and fasten the hose clamp.
Subsequent work for replacing sensor