Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
9. Unclip wire harness at the retaining clips close to the mounting for the right headlight -arrows-.
10. Release connector on TPM transmitter (trigger) -14 and 15- and pull it off.
11. Pull off connector on angle sensor for headlight levelling system at the left and right -16 and 17-.
11.1. Release connector on angle sensor for headlight levelling system at the left and right -arrows A- and pull it off -arrow B-.
11.2. Remove tie-wrap on the left side for fixing the wire harness in place on the refrigerant line -arrow C-.
12. Pull off connector on servo valve -18-.
12.1. Release connector on servo valve -arrow A- and pull it off -arrow B-.
13. Release connector for additional heating -19- and pull it off.
14. Release plug connection on tank for windscreen washer system -20- and disconnect it.
15. Pull off plug connection for ABS sensor and brake pad wear indicator at the left and right -21 and 22-.
15.1. Release plug connection for ABS sensor and brake pad wear indicator in the left and right wheel housing -arrow A- and pull it off -arrow B-.
15.2. Unclip connector socket for ABS sensor and brake pad wear indicator -arrow C-.
15.3. Unclip wire harness at the three retaining clips on the left and right -arrow D-.