Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
16. Pull off connector on left lateral acceleration sensor -24- and circulating pump connector -23-.
16.1. Release connector on lateral acceleration sensor in the left wheel housing -arrow A- and pull it off -arrow B-.
16.2. Release connector on circulating pump -arrow C- and pull it off -arrow D-.
16.3. Unclip wire harness at the retaining clips -arrows E-.
17. Pull off connector on right lateral acceleration sensor -25-.
17.1. Release connector on lateral acceleration sensor in the right wheel housing -arrow A- and pull it off -arrow B-.
17.2. Unclip wire harness at the retaining clips -arrow C-.
18. Loosen wire harness on upper left side member.
18.1. Pull wire harness on upper side member down out of the clips -arrows A-.
18.2. Unclip wire harness at the retaining clips -arrows B-.
19. Loosen wire harness on upper right side member.
19.1. Pull wire harness on upper side member down out of the clips -arrows A-.
19.2. Unclip wire harness at the retaining clips -arrows B-.