Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
2.2. Clip in wire harness on centre firewall with the retaining clip -arrow B-.
3. Secure wire harness on the centre firewall.
3.1. Insert wire harness into the two supports -arrows A- and close the supports -arrows B-.
3.2. Insert line into the two retaining clips -arrows C- and close the retaining clips -arrows D-.
4. Plug in pressure sensor connector (brake assist system) -41-.
4.1. Plug in connector on pressure sensor (brake assist system) -arrow- until it engages securely.
5. Plug in connector on way-sensor (brake assist system) -40-.
5.1. Plug in connector on way-sensor (brake assist system) -arrow- until it engages securely.