Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Plug in connector on brake booster -39-.
6.1. Plug in connector on brake booster -arrow- until it engages securely.
7. Plug in connector on brake fluid reservoir -38-.
7.1. Plug in connector on brake fluid reservoir -arrow- until it engages securely.
8. Screw on ground strap -35- on centre firewall.
8.1. Clip in wire harness on firewall with the retaining clip -arrow A-.
8.2. Connect ground strap together with the twist lock to the threaded bolt on the centre firewall -arrow B- and secure with fastening nut. -
Tightening torque: 9 Nm (6.5 ftlb.)
9. Fit rubber sleeve -34- and plug in connector on hydraulic unit -33-.
9.1. Push front right wire harness through from the interior towards the engine compartment and fit rubber sleeve on the right firewall -arrow A-.
9.2. Route wire harness in plenum panel and clip it in at the retaining clips -arrows B-.
9.3. Plug in connector on hydraulic unit -arrow C- and lock it -arrow D- until the locking mechanism engages securely.