Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-667030.png)
9. Unclip wire harness -Arrow A- and pull it up and out -Arrows B-.
Removing Main Wiring Harness - Dashboard Area
1. Compress right rubber sleeve -Arrows A- and remove it -Arrow B-.
2. Cut tie-wrap -C-.
3. Remove wiring duct together with wire harness from pedal block -arrow-.
4. Press centre rubber sleeve together -Arrows A- and remove it -Arrow B-.
Remove main wiring harness - roof area. Remove fuse element for auxiliary battery.
Remove main wire harness - floor area and left-hand side.
Remove main wire harness - floor area and right-hand side.
Remove main wire harness - engine compartment.
Installing Main Wiring Harness
Installing Main Wiring Harness - Dashboard Area
