Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
1. Press wire harness with wiring duct into pedal block -Arrow A- until locking tabs -B- are felt to engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to rim of centre rubber sleeve -A- and press in rubber sleeve until it is felt to engage in the
firewall. -Arrow B-.
3. Apply a suitable rubber lubricant (tyre mounting paste) to rim of left rubber sleeve -C- and press in rubber sleeve until it is felt to engage in the
firewall -Arrow D-.
4. Fasten line to the clip with a new tie-wrap -A-.
5. Apply a suitable rubber lubricant (tyre mounting paste) to rim of right rubber sleeve -B- and press in rubber sleeve until it is felt to engage in the
firewall -Arrow C-.
Installing Main Wiring Harness - Centre Console
1. Pass the wire harness through and under the floor carpeting -Arrows A- and position in the wiring ducts.
2. Clip in the line -Arrows B-.