Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Close wiring ducts -Arrow A- until locking tabs are felt to engage -B-.
4. Place lines with twist locks -a- on the threaded bolts -arrows- and tighten with fastening nuts -1-. - Tightening torque: 6.5 ftlb.
5. Push together plug connection -Arrows A- until the locking tabs -B- are felt to engage.
6. Push connector onto ESP multiple sensor -Arrow C- until locking tab -D- is felt to engage.
7. Push connector onto airbag triggering unit -Arrow A-.
8. Close securing clip -Arrow B- until the locking tab -C- is felt to engage.
Install main wiring harness - roof area. Install fuse element for auxiliary battery.
Install main wire harness - floor area and left-hand side.
Install main wire harness - floor area and right-hand side
Install main wire harness - engine compartment.
Install dashboard bracket.
Install heater/air-conditioning unit.
Install centre console.
Connect the battery.
Part 1
Removing And Installing Main Wiring Harness - Engine Compartment
Information