Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
6. Release plug connection to front apron -Arrow A- and disconnect -Arrow B-.
7. Unscrew fastening nut -1- (front side member wheel housing) and remove ground straps together with twist lock -a- -Arrow C-.
8. Open clip -Arrow D- and remove line -Arrow E-.
9. Release connector on headlight housing -Arrow A- and pull it off -Arrow B-.
10. Open clips -Arrows C- and remove line -Arrows D-.
Only for vehicles with automatic headlight levelling system.
11. Release connector on angle sensor (rear wheel suspension) -Arrows A- and remove -Arrow B-.
12. Remove plug connection on washer-fluid reservoir from bracket -Arrow A-.
13. Release plug connection -Arrow B- and disconnect it -Arrows C-.