Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-751003.png)
Removing tie rod
1. Remove wheel.
2. For easier removal of the outer tie rod end, swivel the relevant wheel carrier so that the tie rod extends fully. Remove the outer tie rod joints with
the press-out tool T10187. When pressing off, screw lock nut on flush (protects the ball joint thread).
3. Right tie rod: Remove heat shield near joint boot of right tie rod.
4. Remove small clamp -arrow- of joint boot using assembly tool for spring-band clamps NR.72.
5. Cut open and remove large clamp -arrow- of joint boot using a pair of side cutters.
