Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-752009.png)
The following pressure pieces and nuts are required for bearings -C-:
Pressing out:
Tools for pressing out rubber-metal mounts
-
T10230/2
-
T10230/4
-
T10230/5
-
T10230/7
-
T10230/14
-
T10230/15
Information
When using the pressure pieces, the direction arrow shows the direction for pressing the rubber-metal mounts in or out on the trailing arm.
The pressure pieces are used as follows:
Arrangement of tools for pressing out rubber-metal mounts
Pressing in:
