Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
PDCC component arrangement
1. Open the engine compartment lid and remove the left cover.
Information
The fluid level must be almost the same when the engine is running as when it is stopped.
2. Start the engine (check for sufficient ventilation!) and let it run for approx. 1 minute. Check the fluid level while doing so. Then switch off the
engine.
3. Wipe off the dipstick and check the fluid level again (steering hydraulics dipstick shown here). Close and then re-open the cap. The fluid level
must be in the designated range (MAX/MIN level at approx. 20°C). Top up with Pentosin if necessary.
4. After completing the tasks, fit the relevant components and close the engine compartment lid.