Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Screw connection of selector frame
8. Unscrew cable fastening screw -right arrow- on the cable adjustment using special tool special inserts model AB NR.170 and remove retaining clip
-left arrow-.
Selector lever cable connection
9. Remove selector frame.
Installing selector support
Removing and installing cable adjustment
Information
-
When a new selector support is used, the cable adjustment of the selector cable must be modified.
1. Remove pins -direction of arrow- and take out cable adjustment.
Removing the cable adjustment
2. Insert cable adjustment on the new selector support and install pins -direction of arrow-.