Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Installing the cable adjustment
3. When doing so, ensure that the opening for the adjusting screw -arrow- is turned upwards.
Cable adjustment
Installing selector frame
Overview of selector frame
1. Push selector lever cable into cable adjustment.
2. Push on retaining clip -left arrow- and screw in fastening screw -right arrow- using the special inserts model AB NR.170 tool and the accessory for
the torque wrench: open ring wrench insert a/f 13 + adapter NR.98-1 on the cable adjustment. - Tightening torque: 7.5 ftlb.