Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Information
-
Screws which are tightened with a torque angle must be replaced with new ones.
1. Install transmission cross member.
2. Screw in two transmission cross member screws -B- on the transfer gear holder. - Initial tightening: 50 Nm (37 ftlb.) - Final tightening: 90°
Transmission cross member
3. Screw in fastening screws for securing transmission cross member to body -A-. - Initial tightening: 50 Nm (37 ftlb.) - Final tightening: 90°