Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
ATF temperature sensor
6. Plug in cable plug for oil pressure switch -3,4- and inductive pickup for input shaft -6- -arrow-.
Cable plug for input shaft inductive pickup
7. Install wire set for solenoid valves through opening in the housing.
8. Push in the cable plug for the solenoid valves -1,5,8-13-.
9. Screw in the fastening screw from both plugs -arrow-. - Tightening torque: 7.5 ftlb.
Plug installation
Subsequent work
Reworking wiring harness
1. Install ATF filter.
2. Unscrew ATF control screw -A- and fill in ATF until a constant discharge is visible at the lifting tube.