Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Match points for cardan shaft to final drive
3. Mark the position of the cardan shaft -arrow- with respect to the transfer gear flange with a colored pen.
Mark for rear cardan shaft to transfer gear
4. Loosen fastening screws -arrow- securing cardan shaft support to center bearing.
Cardan shaft support to center bearing
Notice
Incorrect tools used for removing components
-
Risk of damage to components
-
Do not use tools, such as a hammer or similar object.
-
Spray components with anti-rust agent before removing them.
Information
-
To loosen the cardan shaft on the rear axle transmission, a second fitter should counter the fastening screws -arrows- at the triangular flange of the
transfer box.