Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Rear cardan shaft to transfer box
5. Unscrew fastening screws on the cardan shaft at the rear axle differential.
Cardan shaft to rear final drive
Information
-
The screws securing the flexible disc to the cardan shaft must not be loosened.
6. Unscrew fastening screws -arrows- used to secure the cardan shaft to the transfer gear. Counter with an open-ended wrench.
Cardan shaft to transfer gear
7. Release cardan shaft center bearing holder. To do this, unscrew six fastening screws -arrows-.