Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
/v8-4.8l_turbo/Page-532004.png)
5. Release lower spring strut.
6. Remove the lower connecting rod -arrow-.
7. Raise wheel carrier with a suitable lift to the extent that connecting rod and fastening pins for spring strut at the bottom are easy to remove. Use a
-lift with a rubber base- to prevent slipping.
8. Undo bolt connecting lower spring strut to axle strut -arrow-.
9. Unclip cable for wear monitor and release holder on wheel carrier.
10. Disconnect the cable on the ABS sensor.
11. Press out wheel carrier at the top with press-out tool T10187.
