Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
Information:
-
Ensure that the round seal is inserted.
Round seal on output flange
-
Replace nut on output flange.
-
Fit nut using screw-locking compound, e.g. Loctite 648.
1. Drive in new sealing ring with special tool pressure piece T10185 until the special tool touches the transmission housing.
Driving in the sealing ring
2. Install output flange and, if necessary, drive in with a plastic hammer.
Information:
-
Ensure that the round seal is inserted.
Round seal on output flange
-
Replace nut on output flange.