Cayenne Turbo (9PA) V8-4.8L Turbo (2008)
3. Engage cap on nozzle head.
3.1. Press out nozzle head -1- from the inside -arrow A- hold it securely.
3.2. Engage cap -2- at the latches on the nozzle head -1- ( -arrows B- ).
Subsequent work
1. Install front apron.
2. Bleed the spray nozzles. The system is bled by activating the spray nozzles for the headlight washer system several times. Depending on whether
the left or right spray nozzle was removed, or whether the water reservoir for the headlight washer system was completely emptied or not, the
bleeding process can require frequent actuation of the spray nozzle.