porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Trunk / Liftgate Motor > < Removing and Installing Lower Part of Lid Lock At Rear|Page 4254
Page 2
background image

2. Check that the rear lid is held down by the safety hook (locking hook) after the upper part of lid lock has been opened.
3. Check whether the return spring on the lock lower part pulls back the safety hook as far as the stop.

Reworking

Subsequent work

Install trim panel for rear lid. Refer to Removing and installing trim panel for rear lid.

Trunk / Liftgate Motor > < Removing and Installing Lower Part of Lid Lock At Rear|Page 4254