Cayman (987) F6-2.9L (2009)
INFORMATION: When sliding in the underbody cover, make sure the overlap is correct.
1. Insert cover for side underbody -1-.
2. Tighten fastening screw -2-. Tightening torque: Final tightening: 1.5 ftlb.
3. Tighten fastening nuts -3-. Tightening torque: Final tightening: 1.5 ftlb.
Subsequent work
Lower the vehicle. Refer to Lifting the vehicle.
Removing and Installing Cover For Front Underbody
Removing And Installing Cover For Front Underbody
Technical values
Preliminary work
Lift the vehicle. Refer to Lifting the vehicle.
Removing cover for front underbody