Cayman (987) F6-2.9L (2009)
5. Coating spot-weld flange areas with zinc powder paint
5.1. Coat spot-weld flange areas with zinc powder paint.
Preparing front panel for installation
Safety instructions for sharp-edged body and unit parts
CAUTION: Pointed or sharp objects
-
Risk of cracks, pricks or cuts
-
Wear personal protective gear.
Preparing front panel for installation
1. Punching holes for plug welding using inert gas
1.1. Punch holes (Dia. = 7 mm) in areas -A- and -B- for plug welding using inert gas. Maintain spacing between the bores as on the old part.
2. Punching holes for plug welding using inert gas
2.1. Punch holes (Dia. = 7 mm) in areas -A- and -B- for plug welding using inert gas. Maintain spacing between the bores as on the old part.