Cayman (987) F6-2.9L (2009)
3. Cleaning the welding areas
3.1. Grind both sides of the connecting flanges of the front panel in the marked areas -A, B, C, D, E- until bare using a rotary brush.
4. Cleaning the welding areas
4.1. Grind both sides of the connecting flanges of the front panel in the marked areas -A, B, C, D- until bare using a rotary brush.
5. Coating spot-weld flange areas with zinc powder paint
5.1. Coat spot-weld flange areas with zinc powder paint.
Installing front panel
Danger of injury while welding
WARNING: Electric welding