Cayman (987) F6-2.9L (2009)
Installing the roof transport system
1. Open flaps in the roof joint cover strips.
2. Unscrew the screw plug -A- from the base plate and keep in a safe place.
3. Position base -3- in the cut-out of the roof joint cover strip.
4. Position adapter -2-, align with the base and secure to vehicle with the fastening screw -1-.
INFORMATION: Observe marking (front/rear) on underside of support tube.
5. Carefully position bracket -2- on the adapter and tighten with fastening screw -1-.