Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-894011.png)
1.3. Align adapter -1- (-arrow A-), press it into the rear apron -2- (-arrow B-) and press on firmly.
2. Install rear spoiler trim.
2.1. Get strips of adhesive tape ready.
A = 30 mm + 60 mm
INFORMATION: Clean bonding surface to remove any dust and grease.
2.2. Affix adhesive tape -2- to the underside of the rear spoiler trim -1-. Place the pulling aids -A- over the edge of the rear spoiler trim.
2.3. Insert mounting pin -2- into the rear spoiler trim -1- and turn it so that it slides into the guide -arrows-.
2.4. Place spacers -3- on the mounting pins -2- (-arrow-).
2.5. Guide rear spoiler trim -1- with the spacers -2- and mounting pins -3- into the slots on the adapters -4- (-arrows-).