Cayman (987) F6-2.9L (2009)
Hydraulic valves for camshaft adjustment and ignition coils
4. If the solenoid hydraulic valve for camshaft adjustment is removed, the oil strainer -1- must be checked for damage and contamination, and
replaced if necessary.
Oil strainer in hydraulic valve for camshaft adjustment
5. Remove oil suction pump 1-3. Unscrew four M6 x 20 Torx screws (micro-self-locking), remove oil suction pump, replace O-ring and screws.
Oil suction pump 1 - 3
6. Unclip oxygen sensor line from the brackets.
Caution
Damage when levering off the cylinder head cover.
^
Cast lugs could break.
-> Perform work steps carefully and gently.
7. Remove cylinder head cover. Unscrew 20 M6 x 30 Torx screws from the cylinder head cover. To loosen the cylinder head cover, raise the cover
carefully at the two protruding cast edges with a screwdriver or mounting lever. Remove cylinder head cover.