porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Condenser HVAC > < Removing and Installing Compressor|Page 3365
Page 7
background image

8. Reinstall the refrigerant line between the compressor and condenser at the compressor and at the condenser.
9. Replace air conditioning compressor.

If there is no wear/chips:

10. Replace the desiccator.
11. Replace air conditioning compressor.

Subsequent work

1. Install drive belt.
2. Install oil separator.
3. Install resonance tube.

Connect the battery and carry out "Work instructions after disconnecting the battery".

4. Fill refrigerant on the air-conditioning system in accordance with regulations.
5. Open air outlet nozzles on the dashboard, and set fan to at least 75 %.
6. After allowing the system to stabilize at idle speed (approx. 5 sec.), switch on air conditioner and allow the engine to run uninterrupted for at least

2 minutes at 1500 rpm.

7. Switch off the air conditioner again. Do not drive until the air conditioner has been filled.
8. Start engine. Turn the steering wheel from stop to stop while the engine is running in order to bleed the steering system.

Condenser HVAC > < Removing and Installing Compressor|Page 3365