Cayman (987) F6-2.9L (2009)
Removing And Installing Compressor-condenser Line At Front
Tools
Technical values
Preliminary work
Preliminary work on compressor-condenser line
Remove front right wheel.
Remove front right wheel housing liner.
Drain refrigerant.
Removing compressor-condenser line
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
-
Wet the O-rings of the refrigerant lines with refrigerant oil.
-
Do not open the plugs for the lines and connections until shortly before installation.
-
Close off all lines and connections using suitable plugs during removal.
-
When loosening or tightening the refrigerant lines with line connections, always counter with the special tool assembly tool 9822 if possible.
-
When loosening or tightening the refrigerant lines with connections to air-conditioning components (e.g. condenser), always counter with a size 21
open-ended wrench if possible.