Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-543038.png)
18.1. Release line from water hose -arrow-.
19. Disconnect plug connection on speed sender -38-.
19.1. Remove speed sender plug connection from cable duct -arrow A-.
19.2. Release speed sender plug connection -arrow B- and disconnect -arrows C-.
20. Release connector at oil level sender -39- and pull it off.
20.1. Release connector at oil level sender -arrow A- and pull it off -arrow B-.
20.2. Unclip the line at the two clips on the oil pan -arrows C-.
21. Disconnect plug connections for oxygen sensor ahead of catalytic converter -40 and 41-.
21.1. Open holder and remove lines from holders -arrows-.
22. Disconnect plug connections for oxygen sensor after catalytic converter -42 and 43-.
