Cayman (987) F6-2.9L (2009)
22.1. Open holder and remove lines from holders -arrows-
23. Release connector on secondary air blower -44- and pull it off.
24. Release sports exhaust system connector -45- and remove it.
25. Release securing clip and pull off connector on intake-manifold flap -46-.
26. Release securing clip and pull off connector on intake-manifold switchover -47-.
27. Release connector on coolant level indicator sensor -48- and pull it off.
28. Release and pull off connector for engine compartment -49-.
29. Release securing clip and pull off connector on coolant change-over valve -50-.
30. Unclip cable duct on left and right fuel collection pipe -arrows-
31. Open connector on PDK transmission -51 and 52- anti-clockwise and pull off.
31.1. Pull line on the four line holders off of the transmission -arrows-.
32. Release and pull off connector on DME control unit -53 bis 55-.
32.1. Unclip wire harness to the DME control unit at the line holder -arrow-.
33. Disconnect plug connections for engine wire harness to main wire harness -56 and 57-.