Cayman (987) F6-2.9L (2009)
Straight pins on reservoir
Drive out straight pins -arrows- towards the pulley side. Use a suitable mandrel that will not widen the bore hole.
1.3.
Pull reservoir -1- off the hydraulic pump -2-.
Installing reservoir for hydraulic pump
Information
Ensure absolute cleanliness!
Ensure absolute cleanliness if the reservoir is disconnected from the hydraulic pump.
If dirt gets into the reservoir, this can cause the hydraulic pump to stop working.
Information
Driving in and securing straight pins
If the straight pins are driven in the wrong direction, this will widen the axial stops.
The straight pins must only be driven in towards the back of the hydraulic pump.
Always use new straight pins. Use a drop of Loctite in the bores to secure the straight pins.
Overview of reservoir for hydraulic pump
1 - Reservoir
2 - Straight pin (2 ea.)
3 - O-ring
4 - Retaining ring
5 - Hydraulic pump
1. Replace sealing ring and retaining ring.
Information
Installing O-ring