porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Steering Wheel|Page 3096 > < Removing and Installing Steering Wheel|Page 3094
Page 3
background image

Lock for cover

1.3.

Remove steering wheel cover (module) -3-.

1.3.1.

Release compression spring -1- in a downward direction -right arrow- and disengage the securing clip -2- by pressing it up -left arrow-.

1.3.2.

Remove steering wheel cover -3-.

Pressing off cover on steering wheel

Place the steering wheel on a suitable surface so that you have enough space for pressing off the steering wheel cover -3-.

Fit a 1/2-inch extension on the steering wheel cover -3- and press the steering wheel cover -3- off the steering wheel by tapping with a hammer.
Repeat the procedure on the other side and remove the steering wheel cover -3-.

2. Install steering wheel cover.

Information

Rocker switch

The rocker switches -4- can only be replaced together with the steering wheel cover. For a perfect fit, the inside of the steering wheel trim is greased at

Removing and Installing Steering Wheel|Page 3096 > < Removing and Installing Steering Wheel|Page 3094