Cayman (987) F6-2.9L (2009)
two places and is also bonded to the steering wheel at six places. When fitting the steering wheel trim for the first time, a two component adhesive set
(Porsche Part No. 000.043.207.48) must be used.
2.1.
Affix the steering wheel cover (module) to the steering wheel -1-.
2.1.1.
Fill mounting points (6 ea) -arrows- for the steering wheel cover (module) with two-component adhesive.
Bonding mounting points on cover
Use a two-component adhesive set (Part No. 000.043.207.48) together with a mixing tube 000.043.207.50 and metering pistol
000.043.207.52 for this.
2.1.2.
The mounting points -2- are greased. They do not need to be regreased.
2.1.3.
Clip the steering wheel cover -3- into the steering wheel -1-.
2.1.4.
Lock the steering wheel cover -3-.
Lock on cover
Press the securing clip (locking mechanism for airbag unit) -2- down -left arrow- and engage it. Engage the compression spring -1-.
2.2.
Secure the rocker switch.