Cayman (987) F6-2.9L (2009)
/f6-2.9l/Page-595003.png)
1. Remove the diagonal braces.
Unscrew nuts -2a- and bolts -2b- and remove diagonal braces at the left and right.
2. Remove support plate.
Unscrew nuts -3a- and bolts -3b- and take off support plate.
3. Remove transmission bracket with hydraulic mount.
Support transmission before removing the transmission bracket! When supporting the transmission, ensure that there is no tension on the screws on
the transmission bracket -A-.
Unscrew nuts -Arrows- on hydraulic mount -B-.
A - Transmission bracket
Hydraulic mount
B - Hydraulic mount
C - Fastening nut (never loosen)
Unscrew screws -Arrows- on transmission bracket -A- and remove transmission bracket -A- together with hydraulic mount.
Mount for transmission bracket
4. Remove cross member -4- together with sensor -5-.
