Cayman (987) F6-2.9L (2009)
Combination wire
Tighten screw -1- on combination wire.
Secure line for brake pad wear indicator on spring strut support.
Connect electric connectors for combination wire for ABS and brake pad wear indicator and lock using a safety clip.
-
Tightening torque: 10 Nm (7.5 ftlb.)
9. Engage the parking-brake cable at the parking-brake lever and adjust parking-brake shoes.
Removing/fitting parking-brake cable
9.1.
Engage the parking-brake cable at the parking-brake lever.
9.2.
Check parking brake adjustment.
Check basic setting of parking-brake shoes. The parking brake cannot be adjusted at the parking-brake cable since it is self-adjusting.
Subsequent work
1. Fit rear wheel.
2. Tighten axle nut on drive shaft (if it was removed).
Tighten axle nut securing drive shaft to wheel hub: - Tightening torque: 460 Nm (340 ftlb.)