Cayman (987) F6-2.9L (2009)
Installing toe control arm
1. Install toe control arm -1-. Replace all lock nuts.
Observe correct tightening torques.
Rear toe and transverse control arm
1.1.
Install eccentric threaded joint (toe control arm) on the rear-axle carrier side section.
Set the basic position of the toe eccentrics at the marked position on the rear-axle carrier side section and tighten lock nuts.
1.2.
Fit toe control arm -1- on the wheel bearing housing -1b-.
Subsequent work
1. Fit wheel.
2. Align the vehicle.