porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2395 > < Procedures|Page 2393
Page 17
background image

26. Release and pull off connectors for KESSY/PAS control unit -82 and 83-.
27. Release and pull off connector for stop light switch -84-.
28. Release and pull off connector for pedal sensor -85-.

29. Loosen ground point under the unit carrier -92-.

29.1. Screw off fastening nut and remove ground straps.

30. Release and pull off connector for tilt sensor control unit -93-.

31. Disconnect plug connections between main wire harness and wire harness for heater/air-conditioning unit -95 and 96-.

31.1. Release lower plug connection on heater/air-conditioning unit -arrows a- and unplug.

31.2. Release upper plug connection on heater/air-conditioning unit -arrows a- and unplug.

Procedures|Page 2395 > < Procedures|Page 2393