Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-493050.png)
1. Release and disconnect plug connection for main wire harness to door wire harness -3 and 4-.
2. Release and pull off connector on head airbag on the left -5- and right -6-.
3. Cut off the head airbag connector on the damaged wire harness, insulate it and secure it to the door wire harness with tie-wraps.
4. Remove rubber sleeve -A- and carefully pull it and the door wire harness out of the A-pillar.
5. Push rubber sleeve back slightly -Arrow-, remove adhesive tape and pull off foil hose -A-.
