Cayman S (987) F6-3.4L (2008)
Seals and Gaskets: Service and Repair
Removing and Installing Sealing Ring For Selector Shaft
WM 373319 Removing and installing sealing ring for selector shaft
Preliminary work
Preliminary work
1. Remove engine-compartment lid.
2. Fix the engine in the installation position using safety device 10-222 A at the engine lifting bracket.
3. Raise the vehicle at the prescribed jacking points.
4. Remove support plate.
5. Remove multi-functional switch.
Removing sealing ring for selector shaft
Removing sealing ring for selector shaft
1. Disengage push rod from ball head on selector lever.