Cayman S (987) F6-3.4L (2008)
/f6-3.4l/Page-397001.png)
Seals and Gaskets: Service and Repair
Removing and Installing Double Sealing Ring
WM 391519 Removing and installing double sealing ring
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove rear right wheel.
3. Remove support plate.
4. Unscrew fastening nuts for restraining cables and remove restraining cables from cross member.
5. Retaining device P 9624/1 must then be screwed to cross member, then turn spindle upwards and support engine.
