Porsche common faults and how to fix them
Faults that are well known on Porsche models we hold manuals for: what the owner notices, what causes it, and the pages in our manuals that cover the repair.
- Porsche IMS bearing: 996, 997, Boxster and Cayman with the M96 and M97 engines
- Porsche rear main seal leak: oil between engine and gearbox on the Boxster and 996
- Porsche bore scoring: smoke, oil use and piston noise on the 996 engines
Porsche IMS bearing: 996, 997, Boxster and Cayman with the M96 and M97 engines
Symptoms
Often there is no warning at all. When the intermediate shaft bearing fails, the shaft that drives the camshaft chains moves, the cam timing is lost and the engine is usually badly damaged.
Cause
The M96 and M97 flat-six engines in the 996 and 997 911, the Boxster and the Cayman drive their camshafts through an intermediate shaft (IMS), which runs on a sealed bearing at the flywheel end of the engine. Wikipedia records the bearing as the best-known M96 problem and the subject of the Eisen class action. Porsche dropped the intermediate shaft with the new engines from 2009.
Fix
Change the oil and filter often and check the filter for metal. On engines where the bearing can be reached, the 996 IMS bearing cover comes off once the gearbox and clutch are removed, so the bearing can be inspected or replaced at the same time as a clutch change. The Boxster IMS bearing cover procedure is similar. Porsche also revised the intermediate shaft drive chain and seal, as its Porsche IMS bearing bulletin explains.
Repair instructions on this site
- Removing and installing the intermediate shaft bearing cover, M96/03 (911 Carrera 4S 996, 2004)
- Removing and installing the intermediate shaft bearing cover, M96/05 (911 Carrera 997, 2007)
- Removing and installing the intermediate shaft bearing cover (Boxster S 987, 2008)
- Porsche bulletin: intermediate shaft drive chain and seal modifications (Boxster 986, 1998)
Sources: Wikipedia — Porsche 996; Wikipedia — Porsche Boxster and Cayman (987); Porsche technical bulletin 8/00 1551.
Porsche rear main seal leak: oil between engine and gearbox on the Boxster and 996
Symptoms
Oil drips from the joint between the engine and gearbox, or an oily patch appears under the back of the car. The leak usually starts small and can come back after the seal is replaced.
Cause
Wikipedia records the rear main seal (RMS) as a known M96 problem, in some cases due to improper machining, and notes that Porsche redesigned the seal. Porsche's own bulletin for the Boxster found that leaks blamed on the flywheel-side crankshaft seal may also come from the crankcase bolt threads and the intermediate shaft flange. From 10 March 2004 Porsche used bolts with sealant-coated threads in this area.
Fix
Clean the area and find the true source of the leak before replacing parts. The gearbox has to come off to reach the seal. On cars built before 10 March 2004, the Porsche rear main seal bulletin replaces the four crankcase bolts and the three intermediate shaft flange bolts as well as the seal. Use the latest seal and the revised fitting method in the 996 RMS bulletin. As the gearbox is off, inspect the IMS bearing cover too.
Repair instructions on this site
- Porsche bulletin 2/04: engine oil leak by crankshaft seal (Boxster 986, 1998)
- Porsche bulletin 1/03: flywheel-side crankshaft seal, revised procedure (911 Carrera 4 996, 1999)
- All Boxster manuals
Sources: Wikipedia — Porsche 996; Porsche technical bulletins 2/04 and 1/03.
Porsche bore scoring: smoke, oil use and piston noise on the 996 engines
Symptoms
Blue smoke from the exhaust, rising oil consumption and noise from the pistons. A cracked cylinder can also let oil and coolant mix, which shows as oily coolant or milky oil.
Cause
Wikipedia records that cracked or scored cylinders are common on the 996's 3.4 and 3.6-litre engines, causing piston noise, oil consumption and smoke, or oil and coolant mixing. Before blaming the bores, rule out the simpler case Porsche covered in a 2002 bulletin: blue smoke during fast cornering on early 2002 911s, caused by too much oil in the sump.
Fix
Check the oil level against the dipstick first. For early 2002 cars, the Porsche blue smoke bulletin lowers the oil fill by 0.5 litres and recalibrates the instrument cluster's oil level reading. If the smoke and oil use continue, check compression and inspect the bores with a borescope through the spark plug holes. Confirmed Porsche bore scoring means rebuilding the engine with new liners and pistons, or a replacement engine.
Repair instructions on this site
- Porsche bulletin 1/02: blue smoke during high-speed turns (911 Carrera 4 996, 2002)
- All 911 Carrera manuals
- All 911 Carrera 4 manuals
Sources: Wikipedia — Porsche 996; Porsche technical bulletin 1/02 (May 2002).
Repair instructions for every Porsche model: Porsche workshop manuals