Panamera 4S (970) V8-4.8L (2011)
4. Unscrew fastening screws at the top -4- of the lock carrier -1- .
5. Remove bumper -1-
6. Remove lock carrier -1- .
Installing lock carrier
NOTE:
Different tightening torque for screwing self-tapping screws into a new or existing, old thread.
-
Incorrectly screwed joints
-
Risk of damage to screw thread
-
Observe different tightening torques.
-
When screwing screws into an existing, old thread, first screw the screws in a few turns by hand, then screw them in fully using a tool.
1. Fit lock carrier
2. Install front bumper.
2.1. Fit the bumper.
2.2. Fit horn and holder -13- .
2.3. Screw in fastening screws -11, 12- and tighten slightly.