Panamera S (970) V8-4.8L (2010)
4. Screw in screw -1- on the wing and tighten to the specified torque
-
Tightening torque: 2.8 Nm (2 ftlb.)±0.5 Nm (±0.5 ftlb.).
5. Screw in screws -1- on the wheel housing liner.
6. Screw in front side screws -1- .
7. Screw in front screws at the bottom -1- .
Additional assembly instructions
INFORMATION: When positioning the front apron, make sure that the air guide is inserted fully into the groove on the retaining frame.