Panamera S (970) V8-4.8L (2010)
-
The front door hinges are installed in reverse order to removal.
-
The hinges can be set at roughly the correct position during installation by positioning them on the existing indents.
-
When installing the hinges on a new door, the door must be readjusted.
-
Tighten all fastening screws to
-
Tightening torque: 33 Nm (24 ftlb.)±10 %.
Installing front door hinge on body side
1. Fit the door hinge.
2. Tighten fastening nuts.
3. Adjusting the front door.
4. Tighten fastening nuts to the specified tightening torque
-
Tightening torque: 33 Nm (24 ftlb.)±10 %.
5. Cover the inside of the vehicle close to the A-pillar, floor and firewall with welding protection covers.
6. Weld the door hinges securely at the bolts -2- .
7. Apply corrosion protection around the welded seam.
8. Install dashboard support.
Subsequent work
1. Install front door
2. Install front door sub-frame